...the hardcore wave sail.
Every few years, the sail's evolution makes a great leap forward. Lighter, more stable, and quicker to get going, the current Taka is a whole new species compared to previous models.
Compared to previous versions of the Taka, we changed the vinyl window to a low-stretch, dyneema enforced film that better transfers gusts of wind into board speed while at the same time making the Taka more stable in high wind.
Like in previous models, the Taka has 3 full battens and a 3/4 batten that allows the sail to luff, which means that it de-powers when sheeted out or rotated into the wind, making the sail go completely neutral in maneuvers. Surprisingly, the luffing also makes the Taka an ideal sail for learning how to foil.
We need a sail that is effortlessly maneuverable while wave riding but still stable and powerful in a straight line. We need a sail that will withstand the bomb set wave as it breaks on our head. We need a sail that we can trust not to break, especially when the conditions are critical. We need a sail built 100% for waves with no compromise in performance or durability. This is the sail we choose for easy backloops, wave 360’s, and double forwards.
Performance is not just about easy tricks, so the Taka accelerates early and has a massive low-end wind range. Many wave sessions require a sail that can adapt to dropping winds—we all know that the best wave sessions are the ones when the wind drops and everyone else has come in.
Wave sailing is our heritage, and the Taka is the expression of our passion, built for everyone that loves the feeling of bottom turning and flying above the lip’s spray.
WHAT IS NEW?
We changed the vinyl window to a low-stretch, dyneema enforced film that better transfers gusts of wind into board speed while at the same time making the Taka more stable in high wind. We modified the construction to be both lighter and more maneuverable. The new TAKA is so much lighter that the new 4.7 weighs as much as the old Taka5 4.2.
HOW DOES THE TAKA DEPOWER SO EASILY?
The Taka has 3 and 3/4 battens. The 3/4 batten allows the sail to luff, which means that it can easily go from full to flat. This is important for many aspects of wave sailing. This allows the Taka to be extra powerful when you’re pumping into a wave or trying to get a jump while also able to go flat and hyper-manouverable when riding a wave or flying through the air. This is most noticeable in bottom turns that are more vertical, backloops that are easier to land, and freestyle rotations that effortlessly.
The Taka is built from state-of-the-art materials that use technology learned from the aerospace and military industries to keep weight as low as possible while still providing 100% performance.
The Taka is built to withstand the daily beatings that a hardcore wave sail must endure, like big waves, sharp rocks, and coral reefs.
When the conditions are good, you want to get on the water as fast as possible and have your sail rigged perfectly. Traditionally, this is a tradeoff. But with the Taka's calibrated rigging, you can tune your downhaul in seconds. Each and every sail is rigged and calibrated in the Ezzy Sails factory. Simply, downhaul till the bottom of your mast lines up with the desired setting: Max, Mid, Min 1, or Min 2 (for extra light winds).
|Size (sq.m.)||Min (cm)||Max (cm)||Min (cm)||Max (cm)||Bottom/Top||(Kg)|
Note on Ezzy Masts
How To Choose The Perfect Mast Combination For Your Quiver:
- Pick the top and bottom that fits the sail you use the most.
- Use a longer top for your bigger sail.
- Use a shorter bottom for your smaller sail.
= Best Combination
= Good Combination
The Ezzy Hookipa Mast
Ezzy Sails work great with the Ezzy Mast system, but also work with a variety of other brand masts (RDM and regular diameter). You could contact your mast maker and see if the bend of your non-Ezzy mast is compliant.
Ezzy mast bend curves are tip: 75% to 79% and base: 62% to 65%
Note: this is not carbon content. This is percentage bend relative to the midpoint bend.